Model: 8250-0
PACKAGE CONTENTS
Item i
Item j
Item k
UniDIN™
DIN Rail Mounting Bracket Kit for
FlexPoint™ and iConverter® User Manual
OVERVIEW
The Omnitron Universal DIN Rail Mounting Bracket model 8250-0 is designed
to provide DIN Rail mounting capabilities for the FlexPoint converter, FlexPoint
converter with DCAdapter, iConverter® Stand-Alone and iConverter 1-module
chassis. This kit contains all the necessary components to provide DIN Rail
mounting for several different mounting orientations.
(2) DIN Rail Bracket
Halves (Pre-assembled)
(2) DIN Rail Bracket Hex
Nuts (Pre-assembled)
(2) DIN Rail Clips
(Pre-assembled)
Item m
Item n
User Manual
(2) DIN Rail Clip Screws
(Pre-assembled)
(4) Bracket Mounting
Screws (In separate bag)
ASSEMBLY AND MOUNTING INSTRUCTIONS
STEP 1. Adjusting Bracket Width
If bracket width adjustment is necessary, loosen the hex nuts ( j ) on the DIN
Rail bracket ( i ) and align the DIN Rail bracket width to match the width of the
media converter. After adjusting the DIN Rail bracket to the desired width,
tighten the hex nuts ( j ) to lock the DIN Rail bracket width.
Figure 1. Pre-assembled Configuration - Mounting Orientation [B]
MOUNTING ORIENTATIONS
This diagram illustrates a converter in four different DIN-Rail mounting orientations.
As shipped from the factory, the UniDIN is ready to be used in configuration [B].
Rear Cover Screw
i
Front Cover
Screw
j
[A]
i
[B]
Converter
[C]
[D]
Figure 2. Mounting Orientations
Figure 3. Adjusting Bracket Width to Match Width of Media Converter
|
Miele Washer W 833 User Manual
NAD Stereo System T760 User Manual
NordicTrack Home Gym NTL12941 User Manual
North Star Portable Generator 165959 User Manual
Omron Nebulizer NE C30 User Manual
One for All TV Video Accessories 706219 User Manual
Onkyo CD Player DX 7355 User Manual
Onkyo Stereo Receiver TX SR307 User Manual
Panasonic Cordless Telephone KXTG6842B User Manual
Panasonic Music Mixer AG HMX100E User Manual